|
File Name:
|
Cartridge Dispense Procedure
|
|
File Size:
|
1,292,801 bytes
|
|
|
|
Document shows the proper way to burp and purge cartridges to insure that you get proper mixing of both parts on ratio to material.
This document shows in pictures the proper way to burp a cartridge to insure that you are dispensing both the A and B side of the two part adhesive into the mixing elements. If you just put the mixer on the cartridge and start dispensing, you may get only one side of the adhesive in the first few inches of your bead. This could cause the bond line to not cure, you must have both parts on ratio and thoroughly mixed to achieve good results.